Hydraulic NC Pressbrake
  • 1 of 21
  • 2 of 21
    Ezy Set NC 89 Go To Controller
  • 3 of 21
    Ezy Set NC 89
  • 4 of 21
    Adjustable Travel Limit Control
  • 5 of 21
    Enclosed Rear Safety Guarding
  • 6 of 21
    Top & Bottom Tooling
  • 7 of 21
    Quick Action Intermediate Clamps
  • 8 of 21
    Adjustable & Sliding Front Sheet Supports
  • 9 of 21
    Adjustable Pressure Control
  • 10 of 21
    Ezy Set NC 89 Go To Back Gauge
  • 11 of 21
    Mobile Foot Control
  • 12 of 21
    Controller Top View
  • 13 of 21
    Mobile Foot Control-Top Buttons
  • 14 of 21
    Adjustable Top Tool Taper Wedge System
  • 15 of 21
    Fine Adjustment Beam Positioning
  • 16 of 21
    Fine Adjust Back Gauge
  • 17 of 21
    Synchronised Torsion Bar
  • 18 of 21
    Synchronised Torsion Bar
  • 19 of 21
    Digit Type Table Crowning
  • 20 of 21
    Segmented Top Punch
  • 21 of 21
    Multi Vee Die Block
Order Code: Z00897
PB-170B - Hydraulic NC Pressbrake
176T x 4000mm
EZY-SET NC-89 Control 2-Axis
On Special
ex GST
inc GST

176T x 4000mm
Motor Power (kW / hp)
11 / 15
Hafco Metal Master Pressbrakes are manufactured in partnership with Hare and Forbes for a world wide market, they are used and accepted from first time user’s right through to established manufacturers.

Metal Master Quality Pressbrakes feature high durability, and provide precision bending capabilities, The Pressbrake main frames are constructed from rolled, stress relieved solid steel to prevent distortion during the bending process and under extreme continuous loads.

Metal Master Pressbrakes are produced in a high volume production process and therefore are able to be manufactured cost effectively, resulting in affordable price, representing value for money and quicker return on investment.

Featuring an adjustable synchronised torsion bar with positive stop system ensures consistent and accurate bending beam parallelism tolerance to 0.01mm via the digital Control unit.

All electrical components are off European quality supplied by, Telemecanique, Merlin Gerin and ABB. Hydraulic control units are supplied by Aron from Italy.
  • Hydraulic / Mechanical ram, synchronised positive stop design, ram stroke controlled by precision mechanical nut depth stops built into each cylinder. Electronically controlled by programmable EZY-SET NC-89 control unit assuring accurate repeatability.
  • Parallelism is ensured by torsion bar that can be easily adjusted by clutch system.
  • Programmable controlled powered back gauge with adjustable height finger stops.
  • Top punch is segmented for return bend clearance, complete with European style quick release punch holder with an adjustable wedge clamping system for crowning. Intermediate clamp has safety key to stop punch dropping.
  • Multi vee ('V') bottom die is made from one 4000mm solid die block design to handle heavy plate, safety edge vee ('V') is incorporated in bottom die block
  • Digit type manual table crowning along bed length
  • Conveniently mounted control box on pendant for quick swivel and adjustments.
  • Enclosed rear gate with micro safety switches complete with sliding rear door for easy access
  • Australian made safety guarding system with European light curtains
  • Swivel pendant control unit operated EZY-SET NC-89 programmable control unit.
  • Sliding front sheet support arms.
  • Emergency stop buttons conveniently located on control panel and foot control.
  • Mobile dual operation foot control.
  • Segmented 86° offset top punch.
  • Solid one piece four way multi vee (''v") die block.
  • Quick action top punch tool holder system with wedge type adjustment.
  • Programmable backgauge with 600mm travel operated EZY-SET NC-89 control unit.
  • Oil tank level indicator.
  • Metal constructed safety guarding surrounding machine with clear side viewing panels.
  • Integrated hydraulic system allowing rapid approach switching automatically to slow bend
  • Programmable EZY-SET NC-89 Go-To digital controller designed to easily change machine parameters (‘X’ & ‘Y’ axis) enabling different positioning of back gauge and top beam via EZY-SET NC-89 control, achieving multiple bend length and angles.

  • European quick release style top punch and clamping system, allowing operator to change position of tooling to suit multiple requirements on complex applications. This feature ensures minimum down time, more productivity and results in reduced cost per finished product.

  • Adjustable sliding blocks control the machines beam to provide desirable open height distance to the (slow speed) mute bending point. Operator adjustable locking knobs for quick adjustment, enables accurate repeatability and increased productivity.

  • Digit type table crowning is a device that enables you to adjust the table bow through a series of wedges to achieve a parallel bend on multiple material thicknesses

  • Segmented heavy duty 86° offset top punch along with a solid one piece four way multi ‘vee’ bottom die block that incorporates safety edge ’vee’. Supporting bottom die block are four screw type adjustable side guide plates to located and align different vee positioning as required by operator for different plate thickness

  • Sliding steel fabricated sheet supports enabling a wide range of material sizes to be aligned and supported at the correct required height. This feature is achieved with a ‘T’ slot machined down the total length of the die bed; sheet supports are also adjustable vertically to assist in supporting material with return bends already folded.
Product Brochure
Spare Parts Ordering
To assist you in ordering your Spare Part to suit Hafco Machinery simply select from the list below, if your part is not listed below please view “Parts List PDF” to identify your part required (if provided) then simply click the "SEND PARTS REQUEST" Button and fill in the required details. Our Spare Parts and Service Department will contact you as quickly as possible. If you need further assistance please contact us.